Archive for blog

24 Hour Plumber Geelong Article

Posted by on January 8, 2015

Most plumbers in Geelong usually provide emergency services which mean that the plumbers provide their services on a twenty four hours basis. This makes it possible to get a 24 hour plumber Geelong provided one has the contacts of the particular plumber. This is helpful and convenient since there are various plumbing issues that require being resolved as soon as possible. Such issues usually make a home un-conducive or they might be causing damages to various amenities in the home. Here are situations where you would call a 24 hour plumber in Geelong.

One of the common situations is when water pipes breaks. This means that the water pipes get damaged and therefore the water starts getting in places where it should not be. The water might be pouring on the house or going to sections of the house that are supposed to be dry. This is even more serious when there is no way where the water can be shut down to wait for the plumber. In such a situation one requires to call the plumber regardless of the time since if the water continues pouring it will eventually flood the house.

Another situation which might require calling a 24 hour plumber Geelong is when a persons hand gets stuck on the sink pipes. This happens when something falls on the sink and then one tries to retrieve it by putting the hand on the pipes. It also happens when children are playing on the sink and they get stuck. In such a situation one will require calling the plumber immediately so that the sink and the pipes can be opened to release the person who is stuck.

When sewer pipes burst it also becomes necessary to call the plumber immediately. This is especially if these pipes are next to the house because the bad small will be coming direct into the house. The result of this is that the house will become un-conducive to stay or sleep in. but when one calls the plumber, the problem will be fixed and therefore the house will become conducive once a gain.

A blocked or overflowing toilet is also a reason that requires immediate attention from the plumber. This is especially if the toilet is near the sleeping areas or there are no other toilets in the house. When the toilet overflows it produces a bad smell and waste might get even onto the floor. When it is blocked it means that one cannot use it unless it is unblocked. Therefore, such situations make it necessary to calla a 24 hour plumber Geelong.

Posted in: blog

Leave a Comment (0) →

I have a blocked drain Geelong, what should I do?

Posted by on December 15, 2014

If you are looking for information on how to fix a blocked drain Geelong then you just landed in the right place where you will get crucial information on what to do when you experience a blocked drain. A Blocked drain is irritating and stressful in nature owing to unpleasant smell and overflowing/flooding but the good news is that there are several home plumbing tips you can use to clean it up and make it functional again.

Hand cleaning– this is the simplest way of unblocking a less severe blockage which is within reach. You just put on a pair of gloves and a paper towel and proceed to clean the sink, bath and shower drains manually. Ensure you remove any foreign objects that shows up in the sink such as hair, scum etc

Use of a plunger– this unblocking method is employed when blockages are out of reach. It is an economical method that involves creating a vacuum around the blocked part to aid in loosening it. You simply plunge a wet towel over the overflowing area and then eliminate air, which might be trapped by tilting it. Plunge repeatedly, as you continue applying intense pressure. After plunging for about 15 times, you can remove the plunger quickly and note if any water starts to move, releasing the blockage scum, hair and debris. If you don’t see any results, repeat the procedure again and you’ll be sure to see some results.

Use of drain rods– these are long flexible rods which can be connected together and inserted into the drain as an attempt to unblock them. This is a great way for clearing up a blocked drain Geelong, but it should be handled by an experienced person to avoid further compounding of the blockage.

Use of drain cleaning chemicals– you can buy these chemicals and use them to clean up the blocked drain. However, they are only effective for a small blockage and are therefore not recommended for large blockage since they won’t fully unblock it and it might recur in future. -Contact a reputable plumber

If all the above methods fail, then it’s a high time to invite a professional plumber in Geelong who will provide a lasting solution to your drainage system using highly efficient tools. That’s how you can easily fix blockage drain Geelong. These do it yourself home tips are effective and cost effective but in case your drainage proves worse, contacting one of the many professional plumbers in Geelong will be a great decision.

Posted in: blog

Leave a Comment (0) →

Uses of a hot water system Geelong

Posted by on December 2, 2014

A hot water system is a system used to supply hot water for use in a house. There is use of a given source of heat energy to heat the water to the required temperature. The system is also fitted with pipes to deliver the hot water to where it is used. Hot water has several uses at home including bathing, cooking, cleaning and can also be heated to steam which has several uses like steaming of food.

There are different types of hot water systems and are mostly classified depending on the source of the heat energy to heat the water. The most common include:-

Solar hot water system

This system makes use of the solar energy from the sun to do heating. It is used for small scale heating and where the water is not to be heated to very high temperatures. Water from a solar heater can be used for bathing and cooking.

Electric shower heads

This is a point of use heating system where water is heated as it flows over an electric heater. The water then flows directly to where it is used. This system is very common in our bathrooms nowadays for heating of our bathing water.

Geothermal heating system

This system uses hot gases from the center of the earth to heat water. It is not common as it is only in countries which experience volcanic activities.

Before you install a hot water system , it is important to consider the following in order to get the best out of your expenditure.

Uses of the hot water

Solar water heater would be the most economical for bathing water and water for cleaning as this water does not need to be heated to high temperatures. Water for cooking may call for use of electricity.

Cost implication

It is also important that you consider the cost of the system to avoid being stuck halfway in your project. This would mean that you see whether the finances you have will take the project to completion.

Availability of the source of heat or fuels

Using a solar heater would call for the availability of solar energy. Installing such a system in cold places would be an informed decision which will just lead to loses.

Environmental effect

Since the heating energy would be from the environment it is good that you consider its effect on it to avoid such things like pollution.

This system is important to us because of the following:-

– It saves time as hot water is readily available whenever needed

– It cuts down on expenditure.

– hot water is a disinfectant.

I would thus recommend that we all install hot water systems to enjoy these benefits.

Posted in: blog

Leave a Comment (0) →

What you need to know about an emergency plumber Geelong

Posted by on November 24, 2014

At some point of your life, you are likely going to face plumbing emergencies Geelong. Plumbing emergencies often occur during those moments that you least expect them. In most cases, they bring some if not all of your house or office operations to a grand halt. Some of the plumbing emergencies can easily be rectified. However, there are situations where you cannot rectify these plumbing problems. It is during these times that you need the services of an emergency plumber Geelong .

Some of the emergencies that require the services of an emergency plumber Geelong include pipe leaks in locations that you cannot intervene. You can make temporary repairs to fix the leak as you wait for the emergency plumber to come and fix the situation. During cold weather, most plumbing emergencies revolve around frozen pipes that require the services of an emergency plumber Geelong . One of the most challenging plumbing problems is having a clogged toilet that requires immediate attention.

Due to the nature of plumbing emergencies, it is important to have the contacts of emergency plumbers Geelong nearby. In essence, one way of getting the right plumber is getting to know some of the plumbing companies in advance. This will help you in choosing the right emergency plumber before disaster strikes.

Some of the considerations to make when choosing the plumber to work with include their time of operation. An emergency plumber should be somebody who can work any time of the day. In essence, the company should also give a clear indication about their response rate in times of emergencies.

Secondly, find out their terms and conditions. Having the right information about their terms and conditions will help you when you make that financial plan. If you are not sure about the standard rates of these service providers, it is advisable if you physically visited some of these offices and then get their rates.

Thirdly, find out whether the company is licensed or not. This will give a sense of security in terms of professional services rendered. Good companies do not fear sharing their certificates. In addition, you should find out how long the company has been in operation. Experience in the field of emergency plumbing is a major consideration when you are looking for an emergency plumber.

Lastly, you can always get information about some of the best emergency plumbers around. This information is important because it enables you to know for sure whether an emergency plumber is effective or not.

Posted in: blog

Leave a Comment (0) →

Do You Have Problems with your Hot Water System Geelong?

Posted by on September 29, 2014

Hot water systems can cause problems every once in a while. Sometimes, when you turn on the shower, it takes a while for the water to actually get warmer. This is due to the amount of distance between the water heater and faucet. This may explain why when you hop into the shower, you are overcome with a cold blast of water! A solution to this is to have a small, water heater in your bathroom.

Another issue that occurs with a hot water system is low water pressure. Your hot water pipes are most likely clogged up with deposited minerals. This can cause you water pressure to go from a great amount of pressure with cold water, to barely any water coming out of the faucet with hot water! If you do not want this to occur, you can call a plumber to flush out your water heater yearly and clean out your pipes.

Also, a big problem with hot water systems is that the hot water turns off for a while. If you have several people in your home, this is a common problem. After some people take nice, hot showers, they leave you with the icy, cold water that nobody wants! We all know that that’s not very fun! A solution to this issue is having your local plumber come and either install a larger water tank heater, or install a tankless water heater. This way, the entire family can enjoy nice, warm showers!

You may also wonder why your hot water tank is noisy. Well, the answer to this is that residue builds up in your water heater, and this may cause those loud pops and pings you hear every now and then! The residue building up in your hot water system can take up a lot of space in your tank, leaving you with a reduced water volume. If this is an issue for you, you can call your plumber to flush out and drain the tank.

Another possible trouble you may have is that your water heater smells. No one wants their house filled with an unpleasant odor! You may have this problem because bacteria is entering through your pipes and is growing. Yuck! Luckily, you can call a plumber to handle this issue for you.

If you are experiencing any of these problems with your hot water system, other problems, or just want a new hot water installed, you can call a plumber to fix them. This way, all your hot water problems will be gone!

Posted in: blog

Leave a Comment (0) →

Uses of a 24-Hour Plumber Geelong

Posted by on September 23, 2014

Most of the plumbers offer their services on normal working days which are Monday to Friday and their time could be limited from 8.am to 5.m, but under certain circumstances, you may need them at certain times regardless of the time or day of the week. You can get plumbing emergencies at odd hours, even in the middle of the night. When your pipe bursts in the middle of the night, it may not be possible to wait until morning. But with a 24 hour plumber you can rest assured that your plumbing emergencies will be dealt with regardless of the time or the emergency.

Most plumbing companies specialize in a number of services. Since they have to work round the clock, they have a 24hour plumber ready to deal with a plumbing emergency. They are also efficient when it comes to fixing the problem before it ruins everything in your house. Their 24 hour services can save you a lot of money that you would have otherwise spent repairing damages.

A good 24 hour plumbing company is not only licensed, but they also have insurance. You need to be sure your plumber is licensed and has gone through a background check. This will give you peace of mind knowing that you will not compromise your security and that of your home by making that call at midnight.

The good thing about a 24 hour plumber is that you can contact him anytime you need help. But prevention is always better than cure; it is always best to avoid emergencies by having a professional plumber to run a few maintenance procedures in your home. It is always better to plan a preventive maintenance appointment, than it is to wake up in the middle of the night to find a room that is flooded, which is also less expensive compared to repairing.

When plumbing emergency occurs, it is always crucial to know which 24 hour plumber to contact. Take your time and pick the best 24 hour plumbing company that will be prompt and efficient when the unexpected happens.

Posted in: blog

Leave a Comment (0) →

Unblocking Blocked Drains

Posted by on August 11, 2014

Block drains are one of the most annoying events that can happen to your when you are at home. There are various reasons why you would be facing this problem. The most common causes of these blockages included

Foreign objects and debris 

Foreign objects that find their way to your drainage may chock your drainage. These objects are usually the objects that are used during cleaning or with water. Soaps, hair, fats, and food are the most common objects that usually block the drain.

Broken pipes 

Your drainage may be blocked because the pipes that channel the water are broken. Broken pipes allow foreign objects that are within the path of the pipe to find their way into the drainage system. Once they are within the system, they prevent the flow of water resulting to blockage.

Water flow related issues 

Blockage as a result of water flow issues are usually as a result of poor installation. If the pipe is such that it requires the flow to go uphill or flow in a levelled ground without external pressure, chances of blockage are high.

How to tell where the problem lies 

If the blockage is on one particular sink or toilet, then the problem is probably with the flow channel of the toilet before it reaches the house drainage system. If more than one sinks or toilets have slow flow or are blocked, then you need to do an inspection on your home pipe work. The problem may be within the house or outside. Look for a square or round plate that les outside your building and check if there is a flow. If the whole neighbourhood is complaining while your whole drainage system is blocked, then the problem is probably with the main drainage system o your neighbourhood.

How to solve the problems DIY

If the blockage is within your house, there are a number of options that you may use to solve the problem. They include:

Plunger 

Grab a toilet plunger and suck water off the blocked sinks or toilets. Fill the sink or the toilet until it is almost full then pump the outlet using the plunger. This way, your will suck the debris or particles that have blocked the system and allow the drainage to continue flowing.

Use Pepsi or Coke 

These drinks are good at removing clogs because they dissolve the calcium that may be causing the clog. Grab two litres of any of the mentioned drinks in their room temperature, pour it down the drain, and let the bubble fizz out. One hour later, armed with hot water, rinse the system. You may use baking soda and vinegar instead of the drinks.

Posted in: blog

Leave a Comment (0) →

Tips To Installing a Hot Water System

Posted by on July 21, 2014

It’s Monday morning. You’re getting ready to jump into the shower so you can get ready for work, when you turn the handle for “Hot,” and nothing happens – your hot water system has gone out, and as usual, at the least opportune time. So, instead of cleaning yours out from time to time you expect to just chug along and magically make hot water forever. Unfortunately, for many reasons such as rust and corrosion, they give out and need to be replaced. The easiest way to do this is to have someone come and replace it, but if for whatever reason you can’t do that, this will serve as your tutorial for doing it yourself. If you give this a good reading, as well as four to six hours, you can be up and running with hot water again.1. Pick a hot water heater. There are probably several places close to you where you can buy another hot water heater. That’s not a problem. What you need to do to make this as easy as possible, however, is to pick the same type of fuel that you are already using, whether gas or electric. For the purpose of this tutorial, that is what we will assume. It’s usually not a problem to move up to a slightly bigger water heater if you so desire. The only thing keeping you from this is the amount of clearance between the water heater and the wall behind it. If you have the room for a bigger one, get it if you want to.
2. Check the plumbing. Now you are ready to install your water heater, but before you do that you will need to make sure the connection dimensions are the same. Otherwise, you will need to make adjustments to the connections to make them fit. Hopefully the plumber who did your installation did the job right, saving you a lot of extra work.

Now for a word of caution: When you move your water heater from where it is and bring in the new one, you will probably need help. Water heaters are very heavy, and trying to wrestle one by yourself is foolhardy. Get some help and save yourself some doctor bills.
3. Shut off the utilities. Begin by turning off the water at the main or at the water heater. Next, you need to turn off the fuel source. If you have an electric water heater, either remove the fuse or turn off the breaker. If you have a gas water heater, turn it off at the main or at the tank. Next, drain the tank.
4. Remove and replace the water heater. You should use a level to make sure it it set up properly.
5. Install the fittings, connect the fuel sources, turn on the water, and let it go.
You have replaced your hot water heater.
Before you declare the job done, make sure you know the laws regarding installation, since some states have safety requirements. These include, for example, California, which requires earthquake fasteners around water heaters.

Posted in: blog

Leave a Comment (0) →
Page 32 of 39 « ... 10 20 30 31 32 33 34 ... »
View Site in Mobile | Classic
Share by: